Mouldboards to suit No. 28 KV Ploughbody - NOW available from stock!

18th September
LH Mouldboard
   
DESCRIPTION PART NUMBER
Left Hand Mouldboard (Shown above) 83229
Right Hand Mouldboard 83228
Bolts to suit H283 x9
H284 x2

NEW - E Approved Rear LED Lamps

9th August 2018
LED Rear Lamp - Vertical Mount

LED Rear Lamp

  • High quality, super bright LEDs for more vivid colour and higher visibility
  • 4 Function each side
  • Lower power consumption
  • Waterproof to IP67 - fully submersible
  • High impact polycarbonate lens
  • Easy installation
  • E Approved and certified for all On or Off Road Vehicles
  • Length 278mm, Width 100mm, Depth 28mm
  • Cable length 2000mm
    • Voltage Stop & Tail Direction Reverse Fog Part Number
    10 - 30V Yes Yes No Yes LA210RAF2
    10 - 30V Yes Yes Yes No LA210RAW2

    Urea - Ad Blue® Nozzle

    3rd August
     

    Urea - Ad Blue® Nozzle
    Urea Ad BLue Nozzle

    Suitable for use with Urea Ad Blue® / Water

    Light weight design with lever lock
    • Flow : Max 60 lpm
    • Inlet: 19mm hosetail
    DESCRIPTION PART NUMBER
    Urea Ad Blue® nozzle with 19mm hosetil TOGAB010

    LED Lamps

    26th July
     

    LED Front - Direction & Postion Lamp
    LED Front Direction & Position Lamp Width 102mm, Height 108mm, Depth 38mm
    • Dual Voltage
    • IP66 / 68 Waterproof
    • Fixed mounting bolts for easy fitting
    • 'E' Approved

    VOLT FUNCTION CABLE LENGTH PART NUMBER
    12/24V
              POSITION     DIRECTION
        •  •
    		2000mm LA1177AW
      
     

    LED Rear - Stop, Tail & Direction
    Stop, Tail 7 Directionp Width 102mm, Height 108mm, Depth 38mm
    • Dual Voltage
    • IP66 / 68 Waterproof
    • Fixed mounting bolts for easy fitting
    • 'E' Approved

    VOLT FUNCTION CABLE LENGTH PART NUMBER
    12/24V
              STOP & TAIL     DIRECTION
        •  •
    		2000mm LA1089AR

    Hydraulic Drive Conversion Kit for MEC9000 & MEC11000 Vacuum Pump

    2nd July
    Hydraulic Drive Conversion Kit

    Hydraulic Drive Conversion Kit to suit MEC8000, 9000, 11000 Mechanical Drive Battioni Vaccum Pump. With this kit you can convert your PTO driven MEC8000 pump to a hydraulic driven pump.

    Kit contains the following:
  • Hydraulic orbital motor (5020400034BP)
  • Pump front cover (4010601160BP)
  • Gear - 53 teeth (4020507013BP)
  • Cross-line relief valve for SMS pump
  • Inline check valve 1/2" Male / Male
  • Gasket, bolts and washers for fitting
  • Instructions leaflet

    • Description Part Number
    Hydraulic drive conversion kit (100CC) to suit Battioni MEC8000 vacuum pump HDC8000BP
    Hydraulic drive conversion kit (125CC) to suit Battioni MEC9000 vacuum pump NEW HDC9000BP
    Hydraulic drive conversion kit (125CC) to suit Battioni MEC11000 vacuum pump NEW HDC11000BP

    Italian Quick Release Male Coupling

    25th June
    OM Quick Release Coupling

    OM Quick Release Male Coupling with 4 Bolt Flange

    Use in conjunction with OM60 series couplings

    COUPLING SIZE FLANGE SIZE COLOUR PART NUMBER
    6" 6" Glavinised OM610

    2 Line Multifaster

    19th June
    2 Line Multifaster

    Faster Logo2 Line Multifaster
    c/w 3 Pin Electric Line

    To suit front end loader attachment
    • 2 x Hydraulic lines, 1 x electric line (3 pin)
    • Body type: P306
    Specifications:
    Base Size:
    Flow Rate:
    Max Working Pressure:    		 06
    40 lpm
    250 bar
    Male
    Female
    COUPLING THREAD No. OF COUPLINGS ELECTRIC LINE PART NUMBER MALE (Mobile) PART NUMBER FEMALE (Fixed)
    3/8" BSP 2 3 Pin 3P306A238GMC 2P3061238GFC

    Shear Pins to suit Husqvarna

    19th June
    Shear Pins to suit Husqvarna

    Part number is for Pack of 10

    DESCRIPTION OE REF. PART NUMBER
    Shear Pin to suit Husqvarna 6mm / 8mm 506966201 FGP506966
    Shear Pin to suit Husqvarna 7mm / 8mm 535410901 FGP535410

    W2400 Series - Star Tubing

    11th June
    W2400 Walterscheid PTO Shaft
       
    Series Ends Tubing Size Part Number
    W2400 1 3/8" 6 Spline Yoke
    1 3/8" 6 Yoke ASGE Collar    		 Star Tubing
    (S4 / S5)    		 1010mm W241010358330S4/5
     
    W2400 Walterscheid PTO Shaft
       
    Series Ends Tubing Size Part Number
    W2400 1 3/8" Spline Yoke
    1 3/8" 6 Spline Shearbolt M10    		 Star Tubing
    (S4 / S5)    		 1010mm W2410105714218250SR
    • 250 daNm

    Pump Service Seal Kits

    31st May 2017
    Pump Service Seal Kits
    Battioni Logo

    Pump Service Seal Kits

    Contents: Gaskets, Seals and 'O' Rings
    Application: Contains all sealing components for reassembling a vacuum pump

    Series Ends Part Number
    MEC Old Series MEC5000, MEC6000, MEC8000 6010202003BP
    MEC New Series MEC9000, MEC11000, MEC13500 6010202004BP
    Star Series 60, 72, 80 6010202008BP

    Short Link Chain (DIN 766)

    24th May
    Short Link Chain

    Short Link Chain

    • Sold in Reel Lengths
    LINK THICKNESS OUTSIDE LINK WIDTH SAFE WORK LOAD ROLL QTY GALVINISED PART NUMBER
    mm mm kN metres  
    4 14 1.5 40 SK04ZREEL
    5 17 2.5 30 SK05ZREEL
    6 20 3.5 15 SK06ZREEL
    8 26 6.3 10 SK08ZREEL

    Blades to suit Kuhn Grass Mower

    16th May 2018

    Kuhn Grass Mower Blade

    Blades to suit Kuhn Mower

  • To suit various models
  • Supplied in boxes of 25 pieces

    • Hole Size Length Width Thickness Side Part Number
    20.5 105 48 4.3 Left Hand K6801410
    20.5 105 48 4.3 Right Hand K6801420
    Kuhn Grass Mower Blade

    Blades to suit Kuhn Mower

  • To suit various models
  • Supplied in boxes of 25 pieces

    • Hole Size Length Width Thickness Side Part Number
    20.5 116 48 4 Left Hand K6804710
    20.5 116 48 4 Right Hand K6804720

    Universal Strimmer Heads

    23rd April
    Strimmer Head

    Medium Duty

    Easy Work Tap-N-Go Strimmer Head

    • Supplied with adaptor for M8 & M10
    • Packed in a display box
    • Comes with strimmer line & adaptors
    DIA. BORE PART NUMBER
    109mm M8 x 1.25 & M10 x 1.25 FGP50729004

     

    Strimmer Head

    Heavy Duty

    Easy Work Tap-N-Go Strimmer Head

    • Supplied with adaptor for M8 & M10
    • Packed in a display box
    • Comes with strimmer line & adaptors
    DIA. BORE PART NUMBER
    130mm M8 x 1.25 & M10 x 1.25 FGP50739003

    FastGrip Line ID Handle

    12th February


    Simple 3 Step Assembly:



    FastGrip Line Handle

    FastGrip for easier hose line identification


    Visual

    With Faster ID Clips it is possible to add information about the lines

    Fits Existing Oil Collection System

    The handle allows for the correct opening of oil caps when connected

    Pressure Tested

    Using a steel Cr III plated adaptor, the Faster system offers the same resistance to burst and pulse pressure as other line components
    • ID Clips allow line information to be added (sold separately)
    • Steel adaptor offers same resistance to burst pressure of line components
    • Working pressure: 350 bar
    • Bursting Pressure: 1200 bar
    TYPE PART NUMBER
    FastGripID Blue Positive IDBLUE-1
    FastGripID Blue Negative IDBLUE-0
    FastGripID Yellow Positive IDYELLOW-1
    FastGripID Yellow Negative IDYELLOW-0
    FastGripID Red Positive IDRED-1
    FastGripID Red Negative IDRED-0
    FastGripID Green Positive IDGREEN-1
    FastGripID Green Negative IDGREEN-0

     

    DESCRIPTION PART NUMBER
    FastGrip line ID handle to suit 1/2" hose LM12GAS

    90º Grease Coupler

    5th April 2018

    90º Grease Coupler

    90º Grease Coupler

    Attaches to grease nipple at 90º allowing greasing in awkward applications
  • Thread: M10x1

    • Description Part Number
    90º Grease Coupler PGS90

    Double Bolt Hose Clips

    6th March
    Double Bolt Hose Clip
    SIZE BOLT SIZE BAND WIDTH PART NUMBER
    89 - 96mm M6x45 20mm 8696DB
    91 - 101mm M6x45 20mm 91101DB
    106 - 116mm M6x45 20mm 106116DB
    111 - 121mm M6x45 20mm 111121DB
    141 - 151mm M6x45 20mm 141151DB
    161 - 171mm M6x45 20mm 161171DB

    CK Foot Chain

    13th February
    • Sold in reel lengths
    CK Foot Chain
    LINK THICKNESS OUTSIDE LINK WIDTH SAFE WORK LOAD PACK QTY GALVINISED PART NUMBER
    mm mm kN metres  
    3 12 0.7 60 CK30ZREEL
    4 16 1.25 30 CK40ZREEL
    5 20 1.9 30 CK50ZREEL
    6 24 2.9 15 CK60ZREEL
    7 28 3.75 10 CK70ZREEL
    8 32 5 10 CK80ZREEL

    Blue Lithium EP2 SV Grease NLGI No. 2

    13th February
    Blue Lithium EP2 SV Grease NLGI No. 2

    Premium Quality Blue Lithium EP2 SV Grease NLGI No. 2

    Premium quality high performance, mineral oil, lithium thickened NLGI No2 lubricating grease suitable for multi-purpose applications. Lithium EP2 SV is formulated on a higher viscosity base oil than standard Lithium EP2 greases to give higher performance

    • Temperature (-20 to +140°C)
    • High degree of corrosion protection
    • Excellent anti-wear protection
    • Long Life
    • Colour: Blue
    DESCRIPTION PART NUMBER
    500g Blue lithium EP2 SV grease cartridge GC500EP2SV

    LED Warning Light Bar

    25th January
    LED Warning Lights

    Features

    • Metal Body
    • Polycarbonate Lens
    • 17 Flash Patterns
    • Bolt Mounted c/w Cable & Control Box

     

    DIMENSIONS DESCRIPTION VOLTAGE CERTIFICATE COLOUR PART NUMBER
    1185 x 220 x 127 88 x 3W high intesity LEDs 12 / 24V R10, CE AMBER LAH681C
    1400 x 220 x 127 104 x 3W high intensity LEDs 12 / 24V R10, CE AMBER LAH681D

    Claw Type Couplings 2018

    22nd January
    Claw Type Coupling with Hosetail
    • Pneumatic Fitting
    		 Claw Coupling with Hosetail
    HOSETAIL SIZE PART NUMBER
    1/2" CLAW0513
    5/8" CLAW0516
    3/4" CLAW0519
    1" CLAW0525
    Claw Type Coupling Blanking Cap
    • Pneumatic Fitting
    		 Claw Coupling Blanking Plug
    DESCRIPTION PART NUMBER
    Coupling blank cap CLAW04
       
       
       


    Claw Type Coupling Female Thread
    • Pneumatic Fitting
    		 Claw Coupling Female Thread
    THREAD SIZE PART NUMBER
    1/2" BSP CLAW0108
    3/4" BSP CLAW0112
    1" BSP CLAW0116
    Claw Type Coupling Male Thread
    • Pneumatic Fitting
    		 Claw Coupling Male Thread
    THREAD SIZE PART NUMBER
    1\2" BSP CLAW0208
    3\4" BSP CLAW0212
    1" BSP CLAW0216


    Claw Type Coupling Hose
    Clamp
    • Pneumatic Fitting
    		 Claw Coupling House Clamp
    TO SUIT HOSE PART NUMBER
    22 - 29mm CLAW04022029
    28 - 34mm CLAW04028034
    32 - 40mm CLAW04032040
       
       
       
       
       
       
       

    General Purpose Hose - Bursting Pressure 60 Bar

    2nd January 2018
    General Purpose Hose
    Termperature Range: -40°C to +100°C
    Description: Synthetic rubber hose, textile spiral construction. Highly flexible and weather resistant
    Applications: Suitable for mineral oils, diesel and petrol up to a maximum aromatic content of 40%, air and water

    Please Note: Hose is sold in 50 metre rolls only

    I.D
    mm    		 O.D
    mm    		 WEIGHT
    PER METRE    		 WORKING
    PRESSURE    		 MIN. BURSTING
    PRESURE    		 ROLL
    LENGTH    		 PART
    NUMBER
    6 12 150g 20 bar 60 bar 50 metres GP6006
    8 15 200g 20 bar 60 bar 50 metres GP6008
    10 17 220g 20 bar 60 bar 50 metres GP6010
    13 20 300g 20 bar 60 bar 50 metres GP6013
    16 24 400g 20 bar 60 bar 50 metres GP6016
    19 28 500g 20 bar 60 bar 50 metres GP6019
    25 35 730g 20 bar 60 bar 50 metres GP6025

    LED Beacon 360° Stem Mounted - Flexible

    18th December 2017
    • Width: 126mm
    • Height :
      LAHR108W: 209mm
      LAHR1012W: 245mm
    • 3 Flash patterns
    • High Intensity LEDs
    • UN ECER10
    		 LED 360 Beacon
    Description
    FLEX MOUNT
    Ⓔ Approved    		  FLEX MOUNT
    Ⓔ Approved
    10-30V LED flex mount beacon
    LAHR108W  LAHR1012W

    Battioni Pump Controller

    5th December 2017

    The Pump Controller/Pump Active Controller is an electronic device designed to monitor the operating conditions of a rotary vane vacuum pump or lobe blower.

    The Pump Controller allows the user to constantly monitor the temperature of the air exiting the monitor pump, the temperature of the cooling water (where applicable), the pressure or vacuum and the presence of oil in the oil pump. All this data is stored in the device memory and can be downloaded to reconstruct the history of the pump.

    Battioni Pump Controller

    Hydraulic Pressure Line Filters

    14th November 2017

    Hydraulic Pressure Line Filter - 3/4" BSP

    Design: In-line Filter
    Working Pressure: Maximum 420 bar
    Filter Element Material: Glass fibre
    Seals: NBR
    Mounting: Vertical
    Flow rate: 125 lpm
    Filter fineness: 25μm
    Pressure Line Filter
    Filter Material Inlet Port Outlet Port Flow Rate Spare Element Part Number
    Microns Type
    25 Glass Fibre

    3/4" BSP
    3/4" BSP
    125 lpm
    HP0502A25ANP01
    FMM0502BADA25NP01

    Pressure Line Filter - 1" BSP

    Design: In-line Filter
    Working Pressure: Maximum 320 bar
    Filter Element Material: Glass fibre
    Seals: NBR
    Mounting: Vertical
    Flow rate: 112 lpm
    Filter fineness: 10μm
    Pressure Line Filter
    Filter Material Inlet Port Outlet Port Flow Rate Spare Element Part Number
    Microns Type
    10 Glass Fibre

    1" BSP
    1" BSP
    112 lpm
    HP1351A10ANP01
    FMP1351BAG2A10NP01

    Junction Box (8 Way)

    11th October 2017

    8 Way Junction Box

    Junction Box (8 Way)

  • Size: 100x 68 x 50mm
  • With 2 x PG11 waterproof connections (5-10mm)
  • 8 pins inside, maximum input 15A
  • IP65

    • Description Part Number
    Junction box - 8 way LAJB3

    Hub Seal Kits & Wheel Caps

    5th October 2017

    ADR logo

    Hub Seal Kits

  • Each seal kit is supplied with 2 x Nilos Rings and 1 x Seal
  • Kits are only sold in pack quantities
  • Part number is for Pack e.g. 9RNIA is 4 x Hub Seal Kits
    		•
    Hub Seal Kit
    Seal ID Seal OD Nilos 1 OD Nilos 2 OD Pack Size Part Number
    25 52 47 52 4 Kits 9RNBA
    30 62 47 62 4 Kits 9RNDA
    35 72 52 72 4 Kits 9RNGA
    40 80 62 80 4 Kits 9RNIA
    45 85 62 85 2 Kits 9RNJA
    50 90 72 90 2 Kits 9RNKA

    ADR logo

    Wheel Cap

    Wheel Cap (Knock On)

    A B C D E Part Number
    47 52 9 28 44 912T47
    52 56 9 29 49 912T52
    62 67 12 34 62 912T62
    72 79 13 39 69 912T72
    80 68 13 39 76 912T80
    90 98 14 43 85 912T90
    100 112 14 45 95 912T100
    111 118 16 47 102 912T110
    121 113 16 50 113 912T120

    Pressure Washer Turbo Nozzles - NEW Improved Design

    29th September 2017

    MTM logo

    Turbo Nozzles

  • Max temperature: 100ºC
  • Thread: 1/4" BSP Female
  • Made in Germany
  • Improved design
    		•
    Turbo Nozzle
    Size Pressure Repair Kit Part Number
    0.45mm 3700psi / 255 bar 410378PW 160217PW

    High Power LED Oval Work Lamp - Flood

    25th September 2017

    High Power LED Oval Work Lamp

    Multi-Volt High Power LED Oval Work Lamp - Flood

  • Aluminium body, Polycarbonate lens and stainless steel mounting brackets
  • Waterproof IP67
  • Shock resistant 20g
  • Ideal for Recovery Vehicles, Agri, Plant and Marine applications
  • Dimensions: Width 148mm x Depth 65mm
  • Cable length: 3000mm

    • Volt Power LEDs Lm Part Number
    10 - 30V 24W 8 x 3W 1800 LA228F1224
    Banner full range of LEDs

    Battioni Flushing Kit

    11th September 2017
    Flushing Kit

    Flushing Kit for Battioni Vacuum Pumps

    NOTE: This kit is only suitable for Battioni MEC Vacuum Pumps with forced lubrication

    • The Flushing Kit makes cleaning with Flushing Fluid very easy
    • Easy to install (plug & play) on all new and existing vacuum pumps
    • User friendly with full instruction supplied with Flushing Kit
    Description Part Number
    Flushing kit to suit Battioni vacuum pumps 6080200325BP
         
    Flushing Fluid

    Flushing Fluid for Battioni Vacuum Pumps

    Battioni Pagani® recommends the use of Battioni Pagani® Flushing Fluid for maintenance of Battioni Pagani® Vacuum Pumps.

    • Keep your pumps performance at the top
    • Extend your pump life
    • Extend your vanes life reducing running costs
    • Protects your pump during long stops
    Description Part Number
    Battioni vacuum pump flushing fluid - 5 litre 5070200102BP

    Heavy Duty Seat Covers

    22nd August
    Heavy Duty seat Covers

    To suit Grammer Seats

             
    Grammer Instructor
    Grammer
    Grammer Maximo Dynamic
    To suit Grammer Instructor
    Tailored to fit the Grammer Instructor Seat    		 To suit Grammer
    Tailored to fit th Grammer seat in many tractors. Seperate headrest    		 To suit Grammer Maximo Dynamic
    3 piece set to suit Grammer Maximo Dynamic with sliding headrest
    Colour Part Number
    Black SC841
    Colour Part Number
    Black SC341
    Colour Part Number
    Black SC441
     

    To suit Ford Transit Vans

       
    Ford Transit
    Ford Transit 2013+
    Ford Transit 2014+
    To suit Ford Transit / Transit Custom Double Seat Cover to suit Ford Transit / Transit Custom 2013+ Double Seat Cover to suit Ford Transit / Transit Custom 2014+
    Colour Part Number
    Black SC651
    Colour Part Number
    Black SC661
    Colour Part Number
    Black SC721
     

    Click here to view our full range of Seat Covers

    W2500 Walterscheid PTO Shaft to suit Power Harrow

    16th August

    Complete with K64 Clutch

    W2500 Walterscheid PTO Shaft
     
    • Application: Tractor to power harrow
     
    Series Ends Tubing Part Number
    W2500 1 3/8 6 Spline yoke
    1 3/4 6 Spline K64 220 daNm    		 S4 | S5 W2571083100K6422R220

    Handle to suit 6" & 8" Hose

    20th July 2017
    Handle to suit 6

    Handle to suit 6" & 8" Hose

    • For 6" hose use with Part Number 162174 (Hose Clip)
    • For 8" hose use with Part Number 214226 (Hose Clip)
    Description Part Number
    Handle to suit 6" & 8" Hose 6008900
    		Application for Hose Handle

    Switch Loom Assembly

    10th July 2017
    Two Handed Grease Gun

    Switch Loom Assembly

    • Single ON/OFF Switch
    • Supply Cable: 1 metre c/w 3 Pole Plug
    • Solenoid Cable: 11 metres (2x1.5) c/w Hirschmann Plug
    Description Part Number
    Switch Loom Assembly c/w Plugs SAL90625604

    Two Handed Grease Gun

    26th June 2017
    Two Handed Grease Gun Two Handed Grease Gun Boxed

    Two Handed Grease Gun

    Now supplied with conversion bush

    • Suitable for 500g & 400g (with conversion bush) threaded grease cartridges
    • Working pressure: 12000PSI

      •  

      Accessories Included:
    • 500mm flexi tube - 1/8" thread
    • 150mm rigid tube - 1/8" thread
    • 4 jaw grease coupler - 1/8" thread
    • Conversion bush for 400g spin-on cartridge
    Description Part Number
    Two handed grease gun c/w accessories PGS500

    Clean Water Tank Tap

    19th June 2017
    Clean Water Tank Tap

    Clean Water Tank Tap

  • 3/4" Thread
  • 8mm Outlet
    • Description Part Number
    Clean water tank tap with 3/4" thread 8365000
    Clean Water Tank Tap with back nut

    Clean Water Tank Tap c/w Back Nut

  • 3/4" Thread
  • 18mm Outlet
    • Description Part Number
    Clean water tank tap with 3/4" thread and back nut 8365001

    Mower Parts to suit Taarup

    14th June 2017
    Disc to suit Taarrup

    Disc to suit Tarrup - Kverneland Mowers

    To Suit Models OEM Number Part Number
    Various models - 5513300094

    Disc to suit Taarrup

    Disc to suit Tarrup - Kverneland Mowers

    To Suit Models OEM Number Part Number
    Various models - 5513400094

    Skid to suit Taarrup

    Skid to suit Taarup - Kverneland Mowers

    To Suit Models OEM Number Part Number
    42 & 43 Series - 5512510086

    BATTIONI Knife Gate Valve

    6th June 2017
    Knife Gate Valve Battioni Logo

     

    Knife Gate Valve

  • Cast-iron gate valve
  • Stainless steel knife
  • Top sealing system with graphite rope and rubber sealing
  • Max pressure: 10 Bar
    • Description Size Part Number
    Knife gate vale c/w double acting ram 6" 6080200136BP

    Original Comer Industries Gearboxes to suit Toppers - BACK IN STOCK

    29th May 2017
    Original Comer Gearbox

  • Comer LF-205J Gearboxes
  • Applications: Flail Mowers, Rotary motors, Manure Spreaders, Toppers

    • Ratio 1 : 1.47 1 : 1.92 1 : 1.92
    RPM 540 540 540
    Rated Input Power
    HP 40 30 30
    kW 34.5 20 20
    Rated Output Power
    daNm 34.5 20 20
    X 1 3/8"
    6 Spline    		 1 3/8"
    6 Spline    		 1 3/8"
    6 Spline
    Y - - 1 3/8"
    6 Spline
    Z ASA Z12
    D.P. 8/16    		 ASA Z12
    D.P. 8/16    		 ASA Z12
    D.P. 8/16
    Gear Arrangement 21 22 - - - 21 22 - - - 27 28 - - -
    Shaft Input X X Y
    Part Number 205801 205805 205809

    Gear Arrangements:

    Gear Arrangements Gear Arrangements

    Lashing Ring c/w Cleat

    29th May 2017
    Lashin Ring

    Lashing Ring c/w Cleat

    Breaking test load 7000kg (only for ring)

  • Ring thickness: 20mm
  • Cleat thickness: 8mm
    • Ring Length Ring Width Cleat Length Cleat Width Part Number
    120 120 60 - 45096822

    Junction Box

    25th May 2017
    3 Way Junction Box

    Junction Box - Inline (3 Way)

    • Size: 84x30mm
    • With 2pcs PG11 waterproof connectors
      (6-10mm)
    • With 3 pins inside, at most 13A
    • IP68
    Description Part Number
    Inline Junction Box - 3 Way LAJB1
    6 Way Junction Box

    Junction Box (6 Way)

    • Size: 83x81x56mm
    • With 2pcs PG11 waterproof connectors
      (5-10mm)
    • With 6 pins inside, at most 15A
    • IP65
    Description Part Number
    Junction Box - 6 Way LABJ2
    		6 Way Junction Box

    Search

    Go to Advanced Search

    Social Media

    McHugh Components Ltd.

    89 Broomhill Road,
    Tallaght Industrial Estate,
    Tallaght,
    Dublin 24,
    Ireland