<< Back | Product Detail

HYDRAULIC DRIVE CONVERSION KIT (MEC9000)

For converting a PTO driven MEC9000 pump to a hydraulic driven pump.
Supplied with 100cc motor which requires about 55 lpm to reach 540 rpm.

To suit brand / model:
Battioni MEC9000 pump (MEC II series)

Contents:

  • 100cc Orbital motor (5020400043BP)
  • MEC gear cover (4010601197BP)
  • MEC gear 53 teeth (4020507013BP)
  • MEC gear cover gasket (4030108049BP)
  • Cross-line relief valve (VAU12OMS)
  • Inline check valve 1/2" Male / Male (VU12M12M)
  • Bolts and washers for fitting

  • ItemNoDescriptionUOMPDF
    HDC9000BPHYDRAULIC DRIVE CONVERSION FOR MEC9000EACH

    Fitting Instructions:
    1. Drain Oil from gearbox.
    2. Remove front cover from gearbox.
    3. Remove PTO gear and replace with HM gear being careful not the damage seals and bearings.
    4. Reassemble using new gearbox cover and gasket.
    5. Fit Hydraulic Motor to flange with bolts and washers supplied.
    6. Replace gearbox oil to fill level and check for leaks.
    7. The Cross-line Relief Valve should be fitted to the Hydraulic Motor using the Allen Screws provided.
    8. To prevent incorrect rotation of the Motor fit the 1/2"Check Valve to the Tank line as in the hydraulic diagram shown in the instructions leafl et provided with each kit.

    Related Items

    ItemNoDescriptionUOMPDF
    4010601197BP4010601197BPMEC GEARBOX COVER 9-13500 HMEACH
    4020507013BP4020507013BPMEC GEAR 53T TO FIT HM PUMPEACH
    4030108049BP4030108049BPMEC GEARBOX COVER GASKETEACH
    5020400043BP5020400043BPORBITAL MOTOR TO FIT HM PUMP 100ccEACH

    This part is found in the following sections

    20 PUMP SPARES

    MECMEC

    Social Media

    McHugh Components Ltd.

    89 Broomhill Road,
    Tallaght Industrial Estate,
    Tallaght,
    Dublin 24,
    D24 EK28
    Ireland