<< Back | Product Detail

MTM logo

FOAM LANCE INTERNAL NOZZLE - 1.4mm

Internal nozzle for use with MTM PF2220 foam lance.
See table below for required pressure / flow rate.

Specifications
  • Nozzle Size: 1.4mm

  • ItemNoDescriptionUOMPDF
    175003PWFOAM LANCE INTERNAL NOZZLE (1.4mm)EACH
    Nozzle Flow Chart

    PF2220 is supplied with a 1.25mm nozzle, if you requirements fall out side the parameters listed below you will need to order the relevant nozzle for your application. Please note for optimal results your pressure washer system should be operating between GREEN flow rates.

    Pressure 1.1mm Nozzle
    175004PW
    1.25mm Nozzle
    Supplied with PF2220
    1.4mm Nozzle
    175003PW
    1.5mm Nozzle
    175002PW
    1450 psi (100 bar) 4.95 lpm 6.0 lpm 7.5 lpm 9.45 lpm
    1740 psi (120 bar) 5.4 lpm 6.5 lpm 8.15 lpm 10.35 lpm
    2030 psi (140 bar) 5.8 lpm 7.05 lpm 8.8 lpm 11.1 lpm
    2320 psi (160 bar) 6.2 lpm 7.5 lpm 9.35 lpm 11.85 lpm
    2610 psi (180 bar) 6.55 lpm 7.95 lpm 9.9 lpm 12.5 lpm
    2900 psi (200 bar) 6.9 lpm 8.4 lpm 10.45 lpm 13.1 lpm
    3190 psi (220 bar) 7.2 lpm 8.8 lpm 11.0 lpm 13.8 lpm

    Related Items

    ItemNoDescriptionUOMPDF
    PF2220PF2220HYDRO FOAM LANCEEACH

    This part is found in the following sections

    Social Media

    McHugh Components Ltd.

    89 Broomhill Road,
    Tallaght Industrial Estate,
    Tallaght,
    Dublin 24,
    D24 EK28
    Ireland